Table of Contents
Advertisement
Charging the Battery
The battery that comes along with your package is not charged.
You need to charge the battery before using the camera.
1. Insert the battery into the battery charger as shown.
2. Connect the battery charger to the adaptor.
3. Plug the adaptor to the main outlet.
The battery charging time is 2 hours.
Turning the Power On and Off
There are two ways to turn on the camera:
• The start up image displays briefly and the startup sound plays if enabled. The zoom lens
extends and the camera is turned on in Record mode.
• The camera is turned on in Playback mode. The zoom lens are not extended.
To turn off the camera, press the Power button.
See "Modes" on page 11 to know more about Record and Playback mode.
Initial Settings
When you turn on your camera for the first time, you will be asked to do the initial settings of
your camera.
When you turn the Power button on, the Language Menu is displayed on the LCD screen for you
to setup the display language.
Setting the Language
1. Press
,
2. Select a language, then press SET to apply.
,
or
to move through the selection.
10
Advertisement
Table of Contents
