Physical Description; Front Panel Rj-45 Ports And Leds; Front Panel Gigabit Ethernet Interfaces And Leds; Other Front Panel Leds - ADTRAN NetVanta 1000 Series Hardware Installation Manual

Hide thumbs Also See for NetVanta 1000 Series:
Table of Contents

Advertisement

NetVanta 1000/1000R Series Hardware Installation Guide

Physical Description

3.
PHYSICAL DESCRIPTION

Front Panel RJ-45 Ports and LEDs

,
The NetVanta 1224
NetVanta 1224ST, NetVanta 1224STR, NetVanta 1224STR PWR, and
NetVanta 1224R front panels contain twenty-four 10/100BaseT Ethernet ports (RJ-45). The NetVanta
1524ST front panel contains twenty-four 10/100/1000BaseT Ethernet ports. These ports are consecutively
numbered one through twenty-four, from left to right, with the numbers screened directly above each port.
Status LEDs for each of these ports are located directly over these numbers. (See Figures 1 through 8.)

Front Panel Gigabit Ethernet Interfaces and LEDs

In addition to the Ethernet ports, the NetVanta 1224ST and 1224STR PWR front panels contain two
Gigabit Ethernet interfaces, and the NetVanta 1224STR contains one Gigabit Ethernet interface. These
interfaces are provided as SFP slots and RJ-45 jacks. Use either the SFP slots (refer to SFP Module Slots
on page 22) or the RJ-45 jacks. These interfaces are labeled
and
, and their status LEDs (also labeled
G1
G2
and
) are located to the left of RJ-45 port 1, above the
LED on the NetVanta 1224ST and
G1
G2
STAT
1224STR. On the NetVanta 1224STR PWR, the
and
status LEDs are located on the right side of the
G1
G2
unit above the SFP slots. The NetVanta 1224R PWR, 1224ST PWR, and 1224STR PWR also have red and
green Power over Ethernet status LEDs located in the upper right and upper left corners (respectively) of
each of the Ethernet and Gigabit Ethernet (where applicable) connectors.

Other Front Panel LEDs

The
LED, which indicates the unit's status, is located to the lower left of RJ-45 port 1. The
STAT
NetVanta 1224STR and NetVanta 1224R also contain LEDs labeled
and
. The
LED
WAN
DBU
WAN
reflects the status of an installed NIM, and the
LED reflects the status of an installed DIM. The
DBU
NetVanta 1524ST has the
LED, which indicates whether the 1524 is a member of a stack. Table 1 on
STK
page 23 describes all of these LEDs, and Appendix A shows the pinouts for the connectors.

Figure 1. NetVanta 1224 Front Panel Layout

Figure 2. NetVanta 1224ST Front Panel Layout

Figure 3. NetVanta 1224STR (AC and DC Versions) Front Panel Layout

61200500L1-34J
Copyright © 2006 ADTRAN, Inc.
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents