Table of Contents
Advertisement
– Send a short text file from your computer. The
content of this file is printed as a string of hexadecimal
codes corresponding to the individual characters
transmitted.
– To exit from hex-dump mode, hold On Line and
press Form Feed (RESET).
6. Print test executed correctly, but unable to print in
Windows® environment
The printer driver may not be installed correctly.
Check that the name of the printer appears in the List of
printers in the Printers dialog box:
– If the printer name is not listed, install it following the
driver installation procedure described in the Quick
Start.
– If the printer name is listed, remove it from the list by
clicking on the Remove button in the Printers dialog
box and then repeat the driver installation procedure.
7. Color printing and your PC monitor.
You are continually getting an "out of memory" message
which is preventing you from printing.
Your color monitor is set to "high" and is processing all
the data.
Change/reduce the setting. You will not lose in printing
quality and you will be able to print without this error
message appearing.
5-10
Color on your PC monitor differs from color on printer.
As your PC monitor and printer use different methods to
create color (PC monitor: red, green, blue; printer: cyan,
magenta, yellow), the colors produced in your printed
document may differ.
Beyond adjusting the printer driver, you will get the best
color matches if you use a 24-bit color monitor.
Color printing speed.
The speed at which your color document is printed
depends on:
– the processing speed of your PC,
– the amount of RAM available in your PC,
– the type of document you are printing.
Troubleshooting
Advertisement
Table of Contents
