NEC SuperScript 150C User Manual page 46

The driver parameter selection is organized in property
sheets. To select the parameters you require for your print
job, open property sheets Settings , Quality or Color , as
necessary.
At the top of the window displayed when you click Settings,
are the following icons, under the title Document Type:
Automatic, Business, Photos, Art, Draft, Custom. Below
these icons are parameters for Paper Size, Paper Type,
and Paper Source. Finally, in the lower third of the dialog
box, are Copies and Orientation settings.
At the bottom of the window, there are six buttons marked
About, Restore Defaults, OK, Cancel, Apply, and Help,
Clicking on:
About Gives publication details of the software.
Restores the default values for the all
Restore Defaults
parameters,
OK Confirms/saves all the parameter values
and exits from the Setup environment.
Cancel Ignores any changes made and causes exit
from the Setup environment,
Apply Applies all changes made prior to selection,
Help Gives access to more detailed information on
the individual parameters in the current window.
4-2
To change any parameter values, just click on the value or
feature you require. To move from one parameter group to
another, just click on the appropriate folder tab at the top of
the window; the parameter group selected is activated and
displayed automatically.
When you have made the all changes you require, click on
OK at the bottom of the window, to save your new
configuration and exit.
Using Software