Table of Contents
Advertisement
Embossed Template
On the inside of the top cover of the printer, there is an
embossed template. This template illustrates the operating
procedure for changing the print head. It also indicates
three error conditions.
Error conditions and corrective action
The three error conditions signaled are:
1. CHECK PAPER
There is no paper in the ASF, or there is a paper jam.
See Chapter 3 for the paper characteristics and loading
procedures and Chapter 5 for information on how to
clear paper jams.
User Interface
2. NOT USED
3. CHANGE INK CARTRIDGE
The print head (ink cartridge) requires replacing.
See Chapter 2 - Replacing the Print Head.
4. CHANGE PRINT HEAD
There is no print head in the printer, the type of print
head you have inserted is not compatible with the printer
driver settings selected, or the Install Cartridge key
has been pressed.
See Chapter 4 for information on the printer driver.
If one of these error conditions occurs, any printer operation
is interrupted, the On Line and Power light indicators start to
flash and the print head carriage is positioned to indicate
the action required.
1-7
Advertisement
Table of Contents
