Table of Contents
Advertisement
3. Pinch together the two lips on the rear of the print head
carriage (behind the print head). The print head is
released.
4. Remove the print head, pulling it upwards by the thumb
and finger grip.
2-2
If the quality of printing is not optimum, run the print
head cleaning operation (see the section entitled Print
Head Care in this chapter).
Print head insertion
For the description of the print head insertion procedure,
see the specific section in the Quick Start.
If you have problems inserting the print head:
Make sure the print head carriage is in the print head
loading position.
Check that the print head chamber is clean and free of
foreign bodies.
NEVER force the print head into the chamber.
Always remove it completely and repeat the entire
insertion operation.
Ink Jet Print Head
Advertisement
Table of Contents
