The dishwasher does not fill/drain
Problem
The In-operation
indicator is flashing
quickly.
The buzzer is sounding.
One of the following
messages appears in
the display:
Please shut the door and
open the stopcock.
Water inlet fault FXX
Possible cause
The stopcock is closed. Open the stopcock fully.
Fault F12/F13:
Water inlet restricted.
Problem solving guide
Remedy
Before rectifying the problem
you must:
– Switch the dishwasher off
with the Off button o.
– Open the stopcock fully.
– Check the water inlet filter
and clean it if necessary
(see "Problem solving").
– The water pressure at the
intake is lower than
30 kPa (0.3 bar).
Seek professional advice.
49