The Dishwasher Does Not Fill/Drain - Miele dishwasher Operating Instructions Manual

Problem solving guide

The dishwasher does not fill/drain.

Problem
The Inlet/Drain check
indicator flashes.
The dishwasher
stops during a
programme.
The Inlet/Drain
indicator flashes.
42
Possible cause
The tap is turned off.
Water intake is
restricted.
Water outlet is
restricted.
Water remains in the
wash cabinet at the
end of a programme.
Remedy
Turn on the tap fully.
Before rectifying the problem,
you must:
– Switch the dishwasher off with
the On/Off button K.
– Turn on the tap fully.
– Clean the water inlet filter (see
"Maintenance").
– The water pressure at the
intake is lower than 30 kPa
(0.3 bar).
Seek professional advice.
– Clean the filter combination.
See "Cleaning and care".
– Clean the drain pump. See
"Maintenance".
– Clean the non-return valve.
See "Maintenance".
– Remove any kink in the drain
hose.