Replacing One Type Of Filter With Another - Miele S 858 Operating Instructions Manual

Replacing one type of filter
with another
You can replace the ACTIVE HEPA
Filter c supplied with your vacuum
cleaner with one of the following
exhaust filters:
a a SUPER air clean filter or
b an ACTIVE air clean filter
The ACTIVE air clean filter is fitted in
the same way as the ACTIVE HEPA
filter.
If replacing c with a, please note
If you wish to replace the ACTIVE HEPA
c with a SUPER air clean filter a, it is
essential that you also fit the filter grille
(see the section on "Accessories
supplied").
The built-in exhaust filter change
indicator (Re-set button 7) is
designed for the change cycle of an
ACTIVE air clean or an ACTIVE
HEPA filter. The filter change
indicator light will have no
significance if a SUPER air clean
filter has been fitted, but should still
be re-set, by pressing on the filter
change indicator light until it goes
out.
SUPER air clean filters should be
replaced everytime you start a new
packet of dustbags.
Maintenance and care
29