Replacing The "Active Air Clean" Filter And The "Active Hepa" Filter - Miele S 560 series Operating Instructions Manual

Maintenance and care
Replacing the "ACTIVE air
clean" filter and the "ACTIVE
HEPA" filter
^ Open the dust compartment lid.
^ Release the catch and remove the
filter.
^ To insert the new filter, fit it so that it
engages at the back and then close
the catch.
^ Close the dust compartment lid
firmly.
Resetting the Exhaust filter change
indicator
If your vacuum cleaner is equipped
with an exhaust filter change indicator
(Re-set button 7), this needs to be
re-set each time the filter is replaced. To
do this the vacuum cleaner must be
connected to the electricity supply.
^ Press on the filter change indicator
light until it goes out. The display is
now back in the starting position
again.
30