Replacing One Type Of Filter With Another - Miele S 560 series Operating Instructions Manual

Replacing one type of filter
with another
Depending on model your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters:
a SUPER air clean,
b ACTIVE air clean or
c ACTIVE HEPA
Please note
1. If you wish to replace the SUPER air
clean filter a with an ACTIVE air clean
filter b or an ACTIVE HEPA filter c, it is
essential that you remove the filter
grille * before fitting the new type of
filter.
2. If you wish to replace the ACTIVE air
clean filter b or the ACTIVE HEPA filter
c with a SUPER air clean filter a, then it
is essential that you also fit the filter
grille *.
* filter grille - see "Accessories
supplied" section.
Some models have a built-in exhaust
filter change indicator (Re-set button
7), which is designed for the
change cycle of an ACTIVE air clean
or an ACTIVE HEPA filter. The filter
change indicator light will have no
significance if a SUPER air clean
filter (a) has been fitted, but should
still be re-set by pressing on the filter
change indicator light until it goes
out.
Maintenance and care
31