Replacing The Active Air Clean Or Active Hepa Filter - Miele S6730 Operating Instructions Manual

Maintenance and care
Replacing the Active Air Clean
or Active HEPA filter
Do not use more than one exhaust
filter at a time.
^ Open the dust compartment lid.
^ Remove the exhaust filter.
^ Fit the new exhaust filter into position.
If you wish to replace the Active Air
Clean or Active HEPA filter with an
Air Clean filter, see "Replacing one
type of exhaust filter with another".
^ Close the dust compartment lid
firmly. It should click into place.
Exhaust filter change indicator
(Reset button) [
The exhaust filter change indicator
(reset button [) must be reset each
time the exhaust filter is changed. To
do this, the vacuum cleaner must be
connected to the electricity supply.
^ Press the reset button [.
The exhaust filter change indicator
goes out and resets to zero.
The filter change indicator can only
be reset by pressing the reset
button after the light has come on.
Pressing the button at any other time
will have no effect.
28