Miele KM 83-2 Operating Instructions Manual page 5

Description of the appliance
KM 83-2
b
Control panel
c
Normal burner
d
Fast burner
e
Pan support
f
Ring support for the Normal burner
g
Burner cap
h
Ignition device
i
Ignition safety control
j
Burner head
k
Cable for connection
to electricity supply approx. 1.10 m
long, with plug according to country.
l
Control for front burner
m
Control for rear burner
KM 93-2
b
Control panel
c
Normal burner
d
Pan support
e
Ring support for the normal burner
f
Burner cap
g
Ignition device
h
Ignition safety control
i
Burner head
j
Fast burner
k
Normal burner
l
Cable for connection
to electricity supply, approx. 1.10 m
long, with plug according to country.
Description of the appliance
m
Control for the front right burner
n
Control for the rear right burner
o
Control for the rear left burner
p
Control for the front left burner
Data plate
Because the data plate is no longer
visible once the appliance has been
built in a 2nd data plate is supplied
which should be stuck into the space
provided on page 14 of these instruc-
tions under After Sales Service.
Special accessories
Special accessories are available from
your Miele Dealer or from the Spare
Parts Department.
Stainless steel cover EA 80
A stainless steel cover is available for
the KM 83-2 hob. Check availability in
each country.
For installation of the cover a minimum
distance of 510 mm is required be-
tween the worktop and wall units.
Do not install the DA 8-2 directly
next to the gas hob.
5