Miele KM 83-2 Operating Instructions Manual page 23

Conversion to alternative types of gas
Changing the main jets
Using a SW 10 socket spanner
loosen the main jets from their holder-
s, using a SW 13 spanner to counter-
hold.
Screw in the new main jets, once
again using the spanner to counter-
hold.
Changing the low setting jets
Using a small screwdriver, unscrew
the low setting jets in the gas fitting.
Conversion to alternative types of gas
Pull the jets out with a pair of pliers,
select the jets as shown in the table
fit and secure.
Town gas A and B,
Town gas ref: TGL 280489 (10/82)
The low setting jets for natural gas E or
LL, or for liquid gas stay in the gas
valve fitting. Adjust the low setting
according to the table for gas flow
settings:
calorific burning
value value
HuB Ho, n
3
(kWh/m ) (kWh/m
3,7 4,6
4,0 4,7
4,3 4,9
4,6 5,5
4,9 5,7
5,2 5,9
Re-assemble the burner but do not
put the hob well back yet.
Turn the low setting jets to adjust the
gas flow . . .
. . . clockwise to increase.
. . . anti-clockwise to decrease.
After correctly adjusting, let the bur-
ners cool and take them apart again.
(See below for reassembly).
gas flow
in l/min
normal strong
3
) burner burner
1,17 2,03
1,08 1,88
1,01 1,74
0,94 1,63
0,88 1,53
0,83 1,44
23