Miele KM 93-2 Operating Instructions Manual
Miele cooktop user manual
Hide thumbs
Also See for KM 93-2:
- Operating instructions manual (28 pages) ,
- Operating instructions manual (14 pages)
Related Manuals for Miele KM 93-2
Summary of Contents for Miele KM 93-2
-
Page 1: Gas Cooktops
Operating instructions for Gas cooktops KM 83-2, KM 93-2 CANADIAN GAS ASSOCIATION A P R O V E D ]ö M.-Nr. 03 998 090... -
Page 2: Description Of The Appliance
Description of the appliance Description of the appliance KM 83-2 KM 93-2... -
Page 3: Description Of The Appliance Km
15 of these instruc- tions. Special accessories Special accessories are available from your Miele Dealer or from the Miele Parts Department. Stainless steel cover EA 80 A stainless steel cover is available for the KM 83-2 cooktop. Check availa- bility in each country. -
Page 4: For Your Safety
For your safety For your safety WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other ap- pliance. -
Page 5: Help Protect Our Environment
Help protect our environment Disposal of packaging The transport and protective packing is mostly manufactured from the following re-usable materials: – Corrugated paper / card board - mostly from recycled materials. – Polyethylene foil (PE) - partly from secondary raw materials. Rather than throwing these materials away, please take them to the nearest recycling center for specific waste. -
Page 6: Table Of Contents
Warning and Safety Instructions ........7 Using the cooktop Burner controls. -
Page 7: Warning And Safety Instructions
Read all instructions before using the cooktop. Use the cooktop only for its in- tended purpose. Do not use the cooktop unless all parts are properly in place accord- ing to the installation and operating in- structions. - Page 8 Always position the handle of the cookware toward the center of the range to minimize burns and spillage. Before removing pots and pans, be sure to turn the cooktop ”OFF“. Always heat oil slowly so it doesn’t bubble over. When frying foods, make sure that...
- Page 9 Please remember that the cooktop may become hot, not only around the burner, but also around the control panel. Ensure that small children do not touch the cooktop when it is being used. Never leave the cooktop unat- tended when cooking with oil or fat.
-
Page 10: Using The Cooktop
Instructions for using the gas burners Place the pan on the pan support. A ring support (trivet) is supplied with the cooktop. It is designed to rest on the pan support when using small pans. The ring support should only be used on a normal (front) burner with a low flame. -
Page 11: Power Outage
Using the cooktop Press in the correct control knob and turn counter-clockwise to the high setting (large flame symbol). When the flame ignites, keep the but- ton pressed in for 5-10 seconds, and then press down firmly once more before letting go. -
Page 12: Suitable Pans
Using the cooktop Using the cooktop Make certain that there is a minimum distance of 5/8" (15 mm) between the pan and the control panel. Never place a pan on the control panel. The outer part of the gas flame is much hotter than the center. -
Page 13: Cleaning And Care
Cleaning and care If of a pot boils over, clean the burner and the cooktop surface immediately, to prevent the substance from burning Burners The burners can be dismantled for cleaning when cold. Burner caps The burner caps can be cleaned with a solution of dishwashing liquid. - Page 14 Control panel / Control knobs Do not use any scouring agents or pads on the knobs or control panel. Clean the cooktop controls and the con- trol panel with hot water and a little dish- washing liquid. After application, rub dry with a clean...
-
Page 15: Problem Solving Guide
In this case call an electrician or the Miele Ser- vice Dept. A match can be used to light the burner. See page 10. -
Page 16: After Sales Service
Your Miele Dealer The Miele Service Department The address of the nearest Service Department is given on the back page. When contacting the Service Depart- ment, please quote the Model and Ser- ial No. -
Page 17: Electrical Connection
Electrical connection Electrical connection The automatic ignition requires connec- tion to a 120 VAC, 60 Hz power supply. Fuse rating is 6 A. These appliances are factory equipped with a power supply cord with a molded three-prong plug – ready for connection to an electrically grounded socket which complies with your local electrical codes or with the... -
Page 18: Gas Connection
Gas connection Gas connection This appliance must be installed with a separate shut-off valve and a gas pressure regulator (included). Both shut-off valve and pressure regulator must be easily accessible to the consumer. This appliance and its individual shut-off valve must be discon- nected from the gas supply system during any pressure testing of that system. -
Page 19: Appliance Dimensions
Appliance dimensions KM 83-2 Measurement Conversion Table KM 93-2 inches 19 5/16 10 7/16 22 1/16 20 1/16 11 3/8 22 13/16 2 3/16 Appliance dimensions... - Page 20 Appliance dimensions Appliance dimensions KM 83-2 Gas connection: Measurement Conversion Table 323,5 KM 93-2 Gas connection: inches 1 3/16 12 3/4...
-
Page 21: Installation Instructions
Installation instructions The cooktop may be installed as shown above. Do not surround the cooktop with cabi- netry, as this presents a fire hazard. Installation instructions The following minimum dimensions must be observed: – a distance of 4" (100 mm) from ad-... - Page 22 Dimension ”B“ will vary depending on how many combisets (cooktops) are installed. The following chart gives dimension ”B“ for a variety of 2 zone (ie KM 83-2) and 4 zone (ie KM 93-2) combinations. 2 zone Combiset 1 Combiset 2 Combisets 3 Combisets...
- Page 23 For building in at the end of a combination: - Dimension B increases by 3 7/8". * Width includes provision for V 98 spacer bar Place the seal provided edge of the cooktop. Width * (= Dimen- sion B) in inch 10-7/16"...
-
Page 24: Conversion To Alternative Types Of Gas
Select the new jets following the table below. The gas cooktop is supplied equipped for natural gas; the appropri- ate gas jet kit for propane gas, LPG, is also supplied with the appliance. - Page 25 Pull the jets out with a pair of pliers. Select the required jets as shown in the table, and install them in the reverse order. Follow the instructions included in the cooktop box for changing the jet it the main gas regulator.
- Page 26 If this is not the case, loosen the secur- ing screw, re-position the air jet and then tighten the securing screw. Re-assemble the cooktop in the reverse order. Important note: When reassembling, it is important to ensure that the profile control panel grips the moulding on the lower casing.
- Page 27 Conversion to alternative types of gas After conversion After converting the gas cooktop to an alternative type of gas, place the label supplied with the jet kit on the data plate. Check that the burner is assembled correctly . Turn on the gas supply.
- Page 28 Alteration rights reserved / CDN, USA - 01/0999...