Assembly Instructions - Flymo Vision Compact 350 Plus User Manual

A
C
2
Lower Handle Assembly (A)
1. Lift the grassbox lid and remove the grassbox.
2. Insert the lower handle into the handle slots,
ensuring that the holes are aligned.
3. Insert the pins and secure with the retaining clips (A1).
4. Replace the grassbox, and lower the grassbox lid
carefully.
Upper Handle Assembly (B)
1. Insert the nut into the handle knob (B1).
2. Align the holes in the upper and lower handles and
secure with the bolt, washer and wing knob (B2).
E

Assembly Instructions

B
1
D
1
3. Fit the cable to the handle with the clips provided
Cable Winder Assembly (C & D)
1. Insert cable winder attachment onto left upper
2. Insert cable winder onto attachment and turn
3. Continue turning the cable winder downward (D1)
How to Fit the Bag
Fit bag
Using with the Bag (E)
1. Lift the grassbox lid. The grassbox will move into
2. Insert the bag into the grassbox. Secure the bag
3. Lower the grassbox lid carefully. Do not drop.
4. Make sure that the grassbox lid is closed correct-
• Please note, this product can be used with or
1
1
(C3). Make sure the cable is not trapped
between the upper and lower handles.
handle as viewed from rear of product (C1).
downward to secure. (C2).
until it can be located onto the top of the lower
handle (D2).
an upright position.
by turning the edges over the rim of the grassbox,
as indicated on the bag.
ly, ensuring that there is no grass trapped
between the grassbox lid and the hood.
without the bag.
2
3
2