IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. The Loose Parts Pack is packaged underneath the deck of the product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd. Customer Service Department direct...
Page 3
Do not repair a damaged cable, re- before leaving the product unattended for any period; place it with a new one. Use only Flymo replacement before clearing a blockage; before checking, cleaning or working on the appliance;...
Assembly Instructions • The Loose Parts Pack is packaged underneath the deck. Assembly of Lower Handles to Deck 1. Place the bolt (A2) through the hole in the lower handle (A1) until the lower handle fits into the recess (A3) 2.
Chevron 32V Only Grassbox Full Window (Chevron 32V Only) grassbox • As the grassbox fills up, grass will be visible through the window (J). empty grassbox • When the window/grassbox is full it is time to empty full the grassbox.
2. Using a soft brush - remove grass clippings from all air intakes (V2), the discharge chute (V3) and the grass box (V4). 3. Chevron 32V only - Using a soft brush, remove grass clippings from the vision window (V5).
Chevron 32V Only Storing your Cable (Chevron 32V only) • Your electric cable can be wrapped around the cable wrap wing knobs to enable tidy and safe storage (W1). Storing your Lawnmower: • Loosen the wing knobs to enable the handles to be folded over the product (W2).
Guarantee & Guarantee Policy If any part is found to be defective due to faulty manufacture Failures not covered by guarantee within the guarantee period, Husqvarna UK Ltd., through its Replacing worn or damaged blades. Authorised Service Repairers will effect the repair or replace- Failures as a result of not reporting an initial fault.