Table of Contents
Advertisement
Prestige 623R-T ADSL Dual-link Router
10/100Mbps Auto-negotiating Fast Ethernet LAN Interface
This auto-negotiation feature allows the Prestige to detect the speed of incoming transmissions and adjust
appropriately without manual intervention. It allows data transfer of either 10 Mbps or 100 Mbps in either
half-duplex or full-duplex mode depending on your Ethernet network.
Protocols Supported
•
TCP/IP (Transmission Control Protocol/Internet Protocol) network layer protocol.
•
PPP (Point-to-Point Protocol) link layer protocol.
•
Transparent bridging for unsupported network layer protocols.
•
DHCP Client, Server and Relay
•
RIP I and RIP II
IP Policy Routing
IP Policy Routing (IPPR) provides a mechanism to override the default routing behavior and alter the packet
forwarding based on the policy defined by the network administrator.
Call Scheduling
Configure call time periods to allow and restrict access to remote nodes.
Networking Compatibility
Your Prestige is compatible with the major ADSL DSLAM (Digital Subscriber Line Access Multiplexer)
providers, making configuration as simple as possible for you.
Multiplexing
Your Prestige supports VC-based and LLC-based multiplexing.
Encapsulation
The Prestige supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483 encapsulation
over ATM and MAC encapsulated routing (ENET ENCAP) as well as PPP over Ethernet (RFC 2516).
SNMP
SNMP (Simple Network Management Protocol) is a protocol used for exchanging management information
between network devices. SNMP is a member of the TCP/IP protocol suite. Your Prestige supports SNMP
agent functionality, which allows a manager station to manage and monitor the Prestige through the network.
The Prestige supports SNMP version one (SNMPv1) and version two (SNMPv2).
1-2
Getting To Know Your Prestige
Advertisement
Table of Contents
Troubleshooting
