Chapter 24 System Maintenance; Command Interpreter Mode Overview; Figure 24-1 Command Mode In Menu 24; Figure 24-2 Valid Commands - ZyXEL Communications Prestige 623R-T User Manual

24.1 Command Interpreter Mode Overview

The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same
functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from
the SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed
information on CI commands. Enter 8 from Menu 24 — System Maintenance. A list of valid commands
can be found by typing help or ? at the command prompt. Type "exit" to return to the SMT main menu
when finished.
Copyright (c) 1994 - 2003 ZyXEL Communications Corp.
p623r-t1> ?
Valid commands are:
sys
etherdbg
p623r-t1>
System Maintenance
This chapter leads you through SMT menus 24.8 to 24.10.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management
Enter Menu Selection Number:

Figure 24-1 Command Mode in Menu 24

exit ether
usb ip

Figure 24-2 Valid Commands

Prestige 623R-T ADSL Dual-link Router
System Maintenance
wan
bridge
Chapter 24
24-1