Figure 19-16 Example 3: Menu 11.3 - ZyXEL Communications Prestige 623R-T User Manual

Step 1. In this case you need to configure Address Mapping Set 1 from Menu 15.1 - Address Mapping
Sets. Therefore you must choose the Full Feature option from the Network Address
Translation field (in menu 4 or menu 11.3) in Figure 19-16.
Step 2. Then enter 15 from the main menu.
Step 3. Enter 1 to configure the Address Mapping Sets.
Step 4. Enter 1 to begin configuring this new set. Enter a Set Name, choose the Edit Action and then
enter 1 for the Select Rule field. Press [ENTER] to confirm.
Step 5. Select Type as One-to-One (direct mapping for packets going both ways), and enter the local
Start IP as 192.168.1.10 (the IP address of FTP Server 1), the global Start IP as 10.132.50.1
(our first IGA). (See Figure 19-17).
Step 6.
Repeat the previous step for rules 2 to 4 as outlined above.
Step 7. When finished, menu 15.1.1 should look like as shown in .
IP Options:
IP Address Assignment= Static
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= Full Feature
Metric= 2
Private= No
RIP Direction= Both
Multicast= IGMP-v2
IP Policies=
The following figures show how to configure the first rule
NAT
Menu 11.3 - Remote Node Network Layer Options
Address Mapping Set= 2
Version= RIP-2B
Press ENTER to Confirm or ESC to Cancel:

Figure 19-16 Example 3: Menu 11.3

Prestige 623R-T ADSL Dual-link Router
Bridge Options:
Ethernet Addr Timeout (min)= 0
19-15