Playlist Playback - Zoom MRS-802 Supplemental Manual

Continuous project playback (sequence play function)

Playlist playback

Select the playlist for continuous project playback as
follows.
1.
From the main screen, press the
[PROJECT] key in the display section.
The project menu appears.
2.
Use the cursor left/right keys to bring up
the indication "PROJECT SEQ PLAY" on the
display, and press the [ENTER] key.
The display shows the screen for selecting a playlist. The
counter in the bottom of the display shows the total
playback time of all projects in the playlist.
SEQ PLAY SEQ PLAY
3 Songs 3 Songs
0 0 0
Total playing time of projects
3.
Turn the dial to select the desired playlist.
4.
Press the PLAY [ R ] key.
Projects are played in the order as registered in the
playlist. The display indication changes as follows.
PLAY PLAY
PRJ001 PRJ001
Project name
Use the [MASTER] fader to adjust the playback volume.
When a project has played through, the next project is
automatically loaded and played.
During project playback, the following keys can be used
to select a track, pause play, or locate a certain point.
6
1
1 1
Current playback
number
● PLAY[ R ] key
Starts playback from the beginning of the current
project.
STOP[ P ] key
●
Interrupts project playback and returns to the start of
the current project.
ZERO[ U ] key
●
Returns to the project registered for playback position
1.
● FF[ Y ] key
Playback stops, and the system jumps to the beginning
of the next project.
REW[ T ] key
●
Playback stops, and the system jumps to the beginning
of the previous project.
When playback of the last project is completed, the
recorder stops.
5.
To return to the main screen, press the
[EXIT] key several times.
ZOOM MRS-802 Ver 2.0