Zoom MRS-802 Supplemental Manual page 8

Creating a CD using the disc-at-once method
6.
Turn the dial to select "DAO (disc-at-once)"
or "TAO (track-at-once)", and press the
[ENTER] key.
The screen for registering projects for the album appears.
END OF END OF
PROJECT PROJECT
0 0
The indication "END OF PROJECT" denotes the end of
the album list of projects. When the album display is first
called up, no project has been registered, therefore the
indication "END OF PROJECT" appears.
7.
Turn the dial to select the project to be used
as track 1 of the album.
The indication "END OF PROJECT" moves up to the
next track (track 2 in this example), and the screen
changes as follows.
Project number and project name
Number and name of project to write as a track
PRJ 001 PRJ 001
PRJ001 PRJ001
436120
Track number
Number of track to write on
CD-R/RW disc
V-take duration
Length of the V-take selected for the master track of
the project, in hours (H), minutes (M), seconds (S),
and milliseconds (MS)
Pressing the PLAY [ R ] key in this condition will play the
master track of the currently displayed project.
NOTE
• A project for whose master track an unrecorded V-take is
selected cannot be chosen as source material. Make sure that
a V-take that you want to use is selected.
• If the master track data for projects included in an album have
been deleted, the album returns to the blank state.
8.
When the project for track 1 has been
selected, use the cursor right key to move
to track 2.
The display indication changes as follows.
8
1
0
1
END OF END OF
PROJECT PROJECT
9.
Turn the dial to select the project to be used
as track 2 of the album.
10.
In the same way, select projects for track 3
and subsequent tracks.
The maximum allowable number of tracks is 99,
provided that there is enough free capacity on the disc.
HINT
When you press the cursor down key, the second line of the
display shows "REMAIN", and the remaining write time on
the inserted CD-R/RW disc appears on the counter. Press
the cursor up key to return to the previous indication.
●
To change projects in an album
Use the cursor left/right keys to select the track
number for which you want to change the project, and
use the dial to select another project.
●
To insert projects in an album
Use the cursor left/right keys to select the track
number where you want to insert a project. Press the
[INSERT/COPY] key in the control section. The
indication "INSERT?" appears on the display. In this
condition, use the dial to select another project, and
press the [ENTER] key. (Subsequent tracks are
renumbered.)
●
To delete a project from an album
Use the cursor left/right keys to select the track
number you want to delete. Press the [DELETE/
ERASE] key in the control section. The indication
"DELETE SURE?" appears on the display. To delete
the project from the album, press the [ENTER] key.
(Subsequent tracks are renumbered.)
●
To delete all projects from an album
On the album screen, press the [DELETE/ERASE]
key in the control section and then the cursor down
key. The indication "ALL DEL SURE?" appears on
the display. To delete all projects from the album, press
the [ENTER] key.
2
ZOOM MRS-802 Ver 2.0