Power And Signal Connections; Ac And Battery Backed Standby Power - Teledyne 3350 Operating Instructions Manual

Alarm Oxygen Monitor

3.5 Power and Signal Connections

This 3350 is designed to operate from 100-240VAC @ 50/60 Hz
power. Connect the included power cord to the AC power as shown in Fig.
3-3 for standard AC unit and Fig. 3-4 for battery backed standby power.
3.5.1
receptacle, fuse block and Power switch are on the Control Unit. A 6-foot,
standard AC power cord is supplied with the analyzer.
Figure 3-1 Electrical Connectors for AC Control Unit
Figure 3-2 Electrical Connectors for DC Control Unit

AC and Battery Backed Standby Power

Primary Input Power (AC version): The power cord
Teledyne Analytical Instruments
Installation 3
3-3