Operation; Introduction; Using The Function And Data Entry Buttons - Teledyne 3190 Series Operating Instructions Manual

Trace Oxygen Analyzer
4.1
Once the analyzer has been mounted, the gas lines connected and the
electrical connections made, the Analyzer can be configured for your appli-
cation. This involves setting the system parameters:
•
•
•
All of these functions are performed via the front panel controls, shown
in Figure 4-1.
Analyzing for the trace oxygen level in the gas passing through the cell
block is the default mode of operation. As long as no front panel buttons are
being pressed the Analyzer is analyzing.
4.2

Operation

Introduction

Defining the user selectable analysis ranges.
Setting alarm setpoints.
Calibrating the instrument.
Figure 4-1: Front Panel Controls and Indicators
Using the Function and Data Entry
Teledyne Analytical Instruments
Operation 4
4-1