1 Introduction
Figure 1-2 Rear Panel (AC and DC versions)
•
Power Connection
•
Analog Outputs
1-4
AC version: 100–240 V ac, at 50/60 Hz.
The connector housing includes the fuse
holder and the power switch.
DC version: Requires between 10 and
36 V dc.
Fuse Holder: Replacing the fuse is
described in Chapter 5, Maintenance.
I/O Power Switch: Turns the instrument
power ON (1) or OFF (0).
0–10 V dc concentration output.
0–10 V dc range ID (or optional
overrange) output.
4–20 mA dc concentration output,
negative ground.
Teledyne Analytical Instruments
Model 3190