Emissivity - Fluke Thermometer 576 User Manual

Emissivity

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
To adjust the emissivity value,
press EMISS., when not in LOG
mode. Use the Up and Down keys
to select "Free" ("Free" will have a
flashing underline).
Press EMISS again. "Free" is not
underlined, and the emissivity icon
flashes. Use the Up and Down keys
to adjust. Press ENTER (D) to acti-
vate this setting.
To choose the emissivity of a mate-
ial, press EMISS.
The display shows a material
name, an emissivity value, and the
calculated temperature value. To
choose another material, use the
Up and Down keys.
Press ENTER to activate this set-
ting.
FAX 781.665.0780 - TestEquipmentDepot.com
576