Hardware And Software Setup - Fluke Thermometer 576 User Manual

576

Hardware and Software Setup

IMPORTANT! Before you install the software
you must connect the unit with the PC to
configure the USB interface.
Proceed as follows:
Connect the unit to the PC via USB. New Hard-
ware will be found. You have to install three
different device drivers - two for USB ports and
one for the camera. A driver is software needed
by your PC to communicate with the thermome-
ter and the camera. You will be asked three times
to install a driver.
Note! During the driver installation, a message
window could appear, indicating that a particular
driver is not supported or authorized by Micro-
soft. Please ignore this message and continue
with the installation.
The Windows Hardware Assistant will guide you
through the installation process. If you are asked
where to look for the drivers choose CD-ROM. In
most cases, Windows will find the drivers auto-
matically. If Windows asks for the file STV680u.
dll please point to the driver's folder of the CD.
18