Fluke Thermometer 576 User Manual page 29

Symptom
Display Code
Photo quality
diminished with
available light.
(Abrupt transitions
between color shades)
Connection of unit
to PC software
does not happen
when software started
No picture in
"Live" mode
window
Unit indicates
"Use flash!" in
bright light
Unit leaves LOG
after a photo and
data recorded.
Photo Mem!
Problem
Light is insufficient for photo
without flash
Wrong com port selected
or correct com port in use.
More than one video
source is installed
The light is too bright for
a photo
The last position has been used If another recording
to record photo and data.
All memory for storing photos
has been used.
Action
Use Photoflash
always on (Dip switch
"Auto/All"set to "All"
or provide more
ambient light.
Select correct com
or disconnect other
device from correct
com port
Right mouse click
on the "Live" mode
window. Choose
correct "Video source"
in the menu.
Go to next location
or reduce brightness.
of the data and
photo is required, then
push Enter button and
use arrow keys to
re-record a position.
1. Download existing
photos and data and
clear memory.
- or -
2. If you don't mind
losing photos
in the unit, you can go
to Setup in the unit,
push the button until
"Clear photo" appears
in the display and
press Enter.
576
29