Operation; Introduction - Teledyne 3300PA Operating Instructions Manual

Percent Oxygen Analyzer
4.1
Once the analyzer has been mounted, the gas lines connected and the
electrical connections made, the Analyzer can be configured for your appli-
cation. This involves setting the system parameters:
•
•
•
All of these functions are performed via the front panel controls, shown
in Figure 4-1.
Analyzing for the percent oxygen level in the gas passing through the
cell block is the default mode of operation. As long as no front panel buttons
are being pressed the Analyzer is analyzing.

Operation

Introduction

Defining the user selectable analysis ranges.
Setting alarm setpoints.
Calibrating the instrument.
Figure 4-1: Front Panel Controls and Indicators
Teledyne Analytical Instruments
Operation 4
4-1