ActionTec 11Mbps Wireless Access Point User Manual page 30

6. The "TCP/IP Properties" window appears. Click IP Address.
7. In the IP Address tab, activate "Specify an IP Address" by clicking on the circle.
When active, a black dot will appear in the circle. If the circle already contains
a black dot, leave it alone.
8. Enter the following numbers in the "IP Address" text box:
Don't include the periods; they are automatically entered.
9. Enter the following numbers in the "Subnet mask" text box:
10. Click OK. The TCP/IP Properties window disappears.
11. If there is a check in the box next to "Detect connection to network media,"
click on it to uncheck the box.
12. In the Network window, click OK. The Network window disappears.
13. The "System Settings Change" window appears, asking whether the computer
should be restarted. Click Yes.
14. The computer restarts. The IP address on the computer is changed.
Appendix A Setting Up Static IP
192.168.0.2
255.255.255.0
29