ActionTec 11Mbps Wireless Access Point User Manual page 23

Actiontec 11Mbps Wireless Access Point User Manual
Can I connect a DSL or Cable Modem to the Access Point?
Yes, if the modem has an Ethernet port.
Can I share an Internet connection through the Access Point?
Yes, but you must install a gateway device between your Internet connection
(DSL modem, etc.) and the Access Point, and then configure the wireless clients
to connect to the gateway and the Access Point.
Can I manually launch the Web Configuration Utility?
Yes. Open your Web browser and enter the following in the Address bar:
http://192.168.0.1/
This IP address is the factory default value. If the IP address of the Access Point
has been changed, enter that value instead. Ensure that the computer and the
Access Point are on the same subnet. See "Appendix A - Setting Up Static IP"
on page 23 for more details.
22