ActionTec 11Mbps Wireless Access Point User Manual page 18

Chapter 4 Setting Up the Access Point
128-bit WEP requires one key of 13 hexadecimal pairs. A hexadecimal digit
consists of alphanumeric characters ranging from 0-9 or A-F. An example of
a 128-bit WEP key is: 3D-44-FE-6C-A1-EF-2E-D3-C4-21-74-5D-B1. To cre-
ate a 128-bit WEP key, enter 13 hexadecimal digit pairs in the Key text box.
After activating 128-bit WEP on the Access Point, a client can join the net-
work only if this key is entered in that client's wireless encryption scheme.
The WEP key can alos be entered in ASCII text. To do this, click the ASCII
WEP key check box, then enter the key in ASCII text.
☞
Note: Not all wireless PC Cards support 128-bit WEP. Ensure all
wireless PC Cards installed in the clients support 128-bit WEP
before activating.
17