ActionTec 11Mbps Wireless Access Point User Manual page 19

Actiontec 11Mbps Wireless Access Point User Manual
Access Control
In the "Access Control" screen, the user can block clients from using the Access
Point.To deny or accept particular clients, enter the MAC (Media Access
Control) address of the client in the "Client MAC address" text box, then click
Add.
☞
Note: Ensure the MAC address entered is in the correct format
(i.e., six sets of two hexidecimal numbers separated by colons). A
properly formatted MAC address would be the following:
00:20:ea:08:00:17
If an incorrectly formatted MAC address is entered, an error mes-
sage stating that an invalid MAC address has been entered
appears. If this occurs, enter a properly formatted MAC address.
The client's MAC address is added to the "Exception List" text box. If Accept all
clients is activated, all entries entered in the Exception List are denied access. If
Deny all clients is activated, all entries in the Exception List are allowed access.
To remove a client from the Exception List, select it from the Exception List text
box, then click Remove.
18