Playback; Audio Playback - Mitsubishi HS-7496E Installation And Operation Manual

Time lapse video cassette recorder
Table of Contents

Advertisement

PLAYBACK

1 Load a prerecorded tape.
AUTO PLAY:
If a cassette with the erasure prevention tab removed is loaded, the unit automatically begins playback mode.
2 Press the REC/PLAY MODE (+) or (-) button to select the desired playback mode.
• A tape recorded in 3H mode can not be played back in 6H, L18H, 72H or 96H mode.
• A tape recorded in 6H, L18H, 72H or 96H mode can not be played back in 3H mode.
3 Set the VIDEO to either COLOR or B/W. When B/W is set, colour recordings are played without colour.
4 Press the PLAY button to start playback.
5 Press the STOP button to stop playback.
^ Turn the SHUTTLE ring to the left to rewind the tape when the VCR is in the stop mode.
^ Turn the SHUTTLE ring to the right to fast forward the tape when the VCR is in the stop mode.
^ ^ ^ ^ ^ PLAYBACK MODE
• When the REC/PLAY MODE button is pressed, the playback mode is switched in the order of 6H } L18H
}72H}96H}6H (in case of the recording in 6H, L18H, 72H or 96H mode)
• In case of the recording in 3H mode, the playback mode is not switched even if the REC/PLAY MODE button is
pressed.

^ ^ ^ ^ ^ AUDIO PLAYBACK

The modes with the letter "L"(L18H) are for audio recording and playback on the linear track.
Playback mode
Audio playback
Picture quality
N
There is normal sound playback only when a tape recorded in 3H-L18H modes is played back in its respective mode.
If a recording is played back in a higher mode than it was recorded, the picture will be played back in slow motion, and
if a recording is played back in a lower mode than it was recorded, the picture will be played back in fast motion.
The picture may move up/down or noise may occur when the tape is played back in the L18H, 72H or 96H mode (even
if the tape was recorded in L18H, 72H or 96H mode).
During the playback of a tape recorded in LP mode, the colour might not appear on the top edge of the screen.
^ ^ ^ ^ ^ When the end of the tape is reached.
The following functions are automatically engaged when tape end is reached during playback or fast forwarding.
Tape End Selected
Playback
Fast forward
POWER
EJECT
VIDEO
PICTURE
COLOR
B/W
POSITION/
SOFT
SHARP
VERTICAL
TRACKING
ADJUST
3
6H
3H
Available
Available
Good
Good
"REPEAT" or "ALARM • PROT"
The tape automatically rewinds to the be-
ginning and stops.
1
L18H
Available
Not Available
Less Vibrating
Vibrating
Stop
23
5
JOG/ADJUST
REC
CLEAR/
REW
STOP
COUNTER MEMORY/
PLAY
DISPLAY
SKIP/INDEX
REC/PLAY
PAUAE
COUNTER
MODE
SHUTTLE HOLD
TIMER REC
RESET
2
4
72H
96H
Not Available
Less Vibrating
"STOP" or "REWIND"
Stop
Stop
SHUTTLE
ENTER/
FF

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hs-7496e(b)Hs-7496emHs-7496em(b)Hs-7496e(a)

Table of Contents