Timer Recording - Mitsubishi HS-7496E Installation And Operation Manual

TIMER RECORDING

Set the recording period by specifying the start and end day of the week for timer recording.
1. Display the "TIMER PROGRAM" setting display.
2. Turn the JOG dial to select "SPECIAL DW" and turn the SHUTTLE ring to the right.
3. Turn the JOG dial to set the start day and turn the SHUTTLE ring to the right.
4. Turn the JOG dial to set the end day and turn the SHUTTLE ring to the right.
• The start and end day cannot be set to the same day.
If an error is encountered when the TIMER REC button is pressed, refer to the following table.
Symptom
TIMER REC indicator flashes.
SPECIAL DW SETTINGS
IN ORDER TO AVOID MISTAKES WHEN USING THE TIMER
• A tape is not inserted.
• A tape with the erasure prevention tab
removed is loaded.
• Date, time or timer recording time is not set.
• A menu is being set.
Fault
19
Action
1. Press the TIMER REC button.
2. Correctly set the timer programme.
3. Press the TIMER REC button and
confirm the TIMER REC indicator
( ) is illuminated.