Advertisement
= oe Bee oe a
a
a
|
[1] Load a Bia ccorded tape.
AUTO
If a cassette with the erasure prevention tab removed is loaded the unit automatically switches to play mode and playback begins.
[2] Press the REC/PLAY MODE buttons to select the desired playback mode.
[3] Select the VIDEO switch setting according to the type of video signal to be played back, COLOR or B/W.
[4] Press the PLAY button to start playback.
[5] Press the STOP button to stop playback.
Rewind — with VCR in stop mode.
Press the REW button to rewind the tape.
m@ Fast Forward — with VCR in stop mode.
Press the FF button to run the tape forward at fast speed.
m
PLAYBACK MODE
When the REC/PLAY MODE button is pressed, the playback mode is switched in the order of 3H — L15H — 15H > L27H — 27H
3H
......
m
AUDIO PLAYBACK
ant
24
piers
ee!
me
ee
ISH,
2a
ae
one
Audio playback
Available
Available
Not available
Available
Not available
Picture quality
Vibrating
Less vibrating
Vibrating
Less vibraiing
The modes with the letter "L' (L15H and L27H) are for audio recording and playback on the linear track.
NOTE:
There is normal sound playback only when the tape recorded in the 3H-L27 modes is played back in the respective modes.
If in a PLAYBACK mode higher than the one in which it was recorded, it will be in slow motion, and if in a lower PLAYBACK
mode,
it will be fast.
The picture may move up/down or noise may occur when the tape is played back in the L15 or L27 mode (even if the tape has been
recorded in the L15 or L27 mode).
When tape end is reached
The following functions are automatically engaged when tape end is reached during playback or fast forward.
The tape automatically rewinds to the
17
Advertisement
