Dialing Station Speed-Dial Numbers; Deleting Station Speed-Dial Entries - Mitel 5360 User Manual

Dialing Station Speed-Dial Numbers

To dial a Station Speed-Dial number:

Deleting Station Speed-Dial Entries

To delete a Station Speed-Dial entry:
1. With the handset on-hook, dial 383. PROGRAM STN SPD (0-9) OR SCROLL appears.
2. Do one of the following:
3. Press # or the ACCEPT menu button to select the bin.
4. Press
5. Press
Mitel ® 5360 IP Phone User Guide – , April 2013
Do one of the following:
•
Dial 382, and then enter the Station Speed Dial bin (0 to 9). The system dials the
number.
•
Press (Up) or
# to select the bin and dial the number.
You can also program buttons to dial Station Speed-Dial numbers.
NOTE See "Assigning Speed-Dial Numbers to Programmable Buttons" on
page 40.
•
Press (Up) or
•
Enter the speed-dial bin (0 to 9).
(Hold) repeatedly until the name is erased, and then press # or the
ACCEPT menu button to continue.
(Hold) repeatedly until the number is erased, and then press # or the
ACCEPT menu button. STN SPD BIN # <number> UPDATED appears.
(Down) to scroll through the speed-dial bins, and then press
(Down) to scroll through the speed-dial bins.
Answering and Placing Calls
Page 39