Printing A Transaction Report (Transaction Report) - Sharp AR-M351N Operation Manual

PRINTING A TRANSACTION REPORT (TRANSACTION REPORT)

When performing Internet-Fax transmission, you can use this function to print a transaction report under conditions
different from those of the relevant key operator program.
If you use this function, you can print a transaction report under your desired conditions only for the current
transmission job.
NOTES
The settings for this function are common to those of the transaction report function included in the special
functions in the fax mode. If the settings are changed in the fax mode, the settings in the Internet-Fax mode are
also changed accordingly.
1
In scanner mode, touch the [SPECIAL
MODES] key and then touch the
ADDRESS REVIEW
SPECIAL MODES
FILE
ENTRY
TTINGS
QUICK FILE
2
Touch the [TRANSACTION REPORT] key.
2/2
TRANSACTION
REPORT
3
Select the desired print conditions.
TRANSACTION REPORT
ALWAYS PRINT PRINT AT ERROR
PRINT ORIGINAL IMAGE
key.
If the address book screen
appears, touch the
[CONDITION SETTINGS]
key to display the
condition settings screen
(page 11).
CANCEL OK
DO NOT PRINT
32
4
Touch the checkbox of [PRINT ORIGINAL
IMAGE] to display a checkmark if needed.
ALWAYS PRINT PRINT AT
PRINT ORIGINAL IMAGE
NOTE
If [DO NOT PRINT] is selected, this item is grayed
out.
5
Touch the outer [OK] key.
OK
CANCEL OK
6
Scan the image as explained in "BASIC
TRANSMISSION METHOD"
SPECIAL FUNCTIONS
If the checkmark is
displayed, a transaction
report including the
transmitted original will
be printed.
To cancel the transaction
report setting, touch the
[CANCEL] key.
(pages 12 to 15).