Sharp AR-M351N Operation Manual page 55

5
Touch the [OPERATION SETTINGS] key,
the [E-MAIL/FTP SETTINGS] key or the [I-
FAX SETTINGS] key, depending on the
program you wish to use.
R PROGRAMS
SETTINGS
OPERATION SETTINGS
FAX SETTINGS
E-MAIL/FTP SETTIN
I-FAX SETTINGS
6
Make desired settings for the selected
program.
Select the desired program from among the
programs listed on the
Detailed descriptions for program settings start on
the next page.
Supplementary explanation of key operation
for key operator programs
KEY OPERATOR PROGRAMS
OPERATION SETTINGS
A
DEFAULT DISPLAY SETTINGS
MUST INPUT NEXT ADDRESS
B
KEY AT BROADCAST SETTING
INITIAL RESOLUTION SETTING
A The name of the program category or particular item to be set will appear on the touch key. The displayed item
is selected by touching the key.
B Check mark boxes are touch keys that show the status of selections. A box with a check mark means the
function is "on" (enabled) and an unchecked box means the function is "off" (disabled). The on/off status
changes each time the box is touched.
C If the settings continue on the following screen(s), touch the
the screens. To return to the category selection screen, touch the [OK] key.
D The currently set numerical value is displayed.
E Numerical values can be set by touching the
previous page.
THE NUMBER OF DIRECT ADDRESS/
SENDER KEYS DISPLAYED SETTING
THE NUMBER OF FILE NAME/
SUBJECT KEYS DISPLAYED SETTING
7
Touch the [OK] key to return to the screen
of step 5.
OK
8
Press the [CA] key to exit the program.
These
available on setting screens that
require the entry of numerical values.
OK
1/2
6
6
C
and keys to move back and forth through
and keys.
54
KEY OPERATOR PROGRAMS
If you wish to use
another program, touch
the key for that program
in the screen of step 5.
keys and indicator
(1-15)
15
D E
are