Table of Contents
Advertisement
Advanced menu
In the Advanced menu of the Setup Utility, you can change the following settings:
Figure 8-2. Setup Utility Advanced Configuration Screen
COM1/COM2 Specifies the serial communication devices assigned to COM1 and
COM2.
IR Mode Specifies the mode of the IR Port. Select IrDA1.1 in ordinary usage.
LPT Extended Mode Specifies the mode of the printer port among Output Only,
Bi-Directional, EPP and ECP.
If you set ECP as LPT Extended Mode, you cannot use IrDA1.1 in the IR
Mode.
SaveToDisk Warning Message Defines whether the warning message appears
after the system restarts if there is no suspend-to-disk partition in the hard disk.
Plug & Play O/S Defines whether the operating system has plug & play function.
Since Windows 95 supports the function, the default value is Yes. If you use MS-
DOS, Windows 3.1 OS/2 or UNIX, set it to No.
8
Setup Utility 8-5
Advertisement
Table of Contents
