Advanced Menu
LPT port sets the printer port, selecting the LPT port mode, the base I/O address,
IRQ, and DMA channel. Enabled means that you can set the items by yourself. Auto
means the Mode can be selected (Bi-directional, ECP (Extended Capabilities Port
mode), EPP (Enhanced Parallel Port mode) or Output only). Disabled means that you
cannot use the port.
Internal Pointing Device enables or disables the built-in glide pad.
Resolution Expansion defines whether the Setup Utility screen is expanded when the
resolution is 640x480 or 800x600. Enabled means that the screen is expanded.
Plug&Play O/S enables or disables plug & play function. Normally this option has to
be set as default.
PCI Configuration normally has to be as default.
6
6-4