Security Menu - Sharp PC-9800T Manual

Security menu

In the Security menu of the Setup Utility, you can change the following settings.
See also the previous chapter about setting the password.
Supervisor Password is Defines whether a supervisor password is required. If
Password on boot is enabled and if this item is enabled, you have to input the
supervisor password when the system boots.
User Password is Defines whether a user password is required. If Password on
boot is enabled and if this item is enabled, you have to input the user password
when the system boots.
Set Supervisor Password Defines the supervisor password.
Set User Password Defines the user password.
• In some settings of the password, you cannot select some items.
• You cannot set the user password unless setting the supervisor
password.
If you lose your password, you will be unable to access the notebook or
change the configuration. Make sure to select a password you will never
forget, or write it down and protect it in a secure place. Otherwise, you
will have to contact your dealer for assistance.
Figure 8-3. Security Menu
8
Setup Utility 8-7