Advanced Menu - Sharp PC-MR70 Manual

Advanced menu

Advanced Chipset Control
Share Memory Sets the video memory size shared with the extend memory.
Device Menu Enables or disables the internal devices (audio, LAN, or the built-in
modem).
I/O Device Configuration
COM1 Port Assigns the base I/O address and IRQ for the RS-232C serial port.
Enabled means that you can select the item by yourself. Auto means that the item is
automatically assigned. Disabled means that you cannot use the port.
COM2 Port Assigns the base I/O address and IRQ for the infrared port. Enabled
means that you can select the items by yourself. Auto means that all the items except
the mode are automatically assigned. Disabled means that you cannot use the port.
Mode Defines the IR mode. You cannot use ASK on your computer.
Parallel Port Assigns the base I/O address and IRQ for the printer port. Enabled
means that you can select the items yourself. Auto means that the base I/O address is
automatically assigned. Select the printer mode in Mode below. Disabled means that
you cannot use the port.
Mode Specifies the printer port mode: Output only, Bi-directional, ECP (Extended
Capabilities Port mode) or EPP(Enhanced Parallel Port mode).
Floppy disk Controller Defines whether to use the floppy disk drive. To use it, set
this item to Enabled.
Pointing Device Enables or disables the glide pad and an optional external
PS/2mouse. Enabled means disabling the glide pad if a PS/2 mouse is connected.
Disabled means disabling both the glide pad and a PS/2 mouse.