Advanced Menu - Sharp PC-9820 Manual

Advanced menu

In the Advanced menu of the System Configuration Utility, you can change the
following settings:
LPT Extended Mode
Shadow
Reserved
Total RAM
C a c h e (Ext) = X)(x K B
COM Port Enables or disables COMl and/or COM2 and specifies which devices
are assigned to COMl and/or COM2.
IR Mode Specifies the mode of the IR Port. Select ZrDA1.1 in ordinary usage.
LPT Port Assigns the I/O address and the IRQ of the printer port.
LPT Extended Mode Specifies the mode of the printer port. If you select ECP, you
cannot use ZrDA1.I in the ZR Mode. (EPP stands for Enhanced Parallel Port, and
ECP stands for Extended Capabilities Port.)
the system restarts if the suspend-to-disk partition is not recognized in the hard disk.
Keyboard NumLock Defines whether the built-in numeric keypad (blue legends) is
active in NumLock mode.
B IFiu 7
= XX KB
XX% KB
=
= )(xX)(x KB
I t e m
< E n t e r > T o g g l e V a l u e
S e l e c t CC&i 1 and COM 2 two.
T h e MOOEM i n d i c a t e s i n t e r n a l