Fisher-Price POWER WHEELS 74765 Owner's Manual & Assembly Instructions page 13

20
Hole
• With the sport bar positioned to angle towards the rear of
the vehicle, fit the ends of the sport bar into the holes in
the vehicle body on either side of the seat.
• Press firmly on each side of the sport bar to fit it into the
vehicle body.
21
Tether
• Face the back of the vehicle.
• With the gas cap tether pointing down, insert and snap
the gas cap assembly into the square opening in the rear
of the vehicle.
Assembly
Sport Bar
Hole
Seat
Rear of
Vehicle
Gas Cap
Assembly
22
Taillight Lens
• Using safety scissors, separate the taillight lenses and
taillight housings from the plastic connectors. Dispose of
the plastic connectors properly.
• Fit a taillight lens in a taillight housing.
23
Rear of
Vehicle
Body
• Face the back of the vehicle.
• Align the holes in the taillight with the holes in the
vehicle body.
• Insert two #8 x 1" screws through the holes in the taillight
and into the vehicle body.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
• Repeat steps 22 and 23 to assemble the other taillight
lens and taillight housing to the vehicle body.
13
Taillight
Housing
Taillight