Fisher-Price POWER WHEELS 74765 Owner's Manual & Assembly Instructions page 12

16
• Lift the hood.
• Fit the tabs at the bottom of the grille into the slots in the
vehicle body.
• Press near the top of the grille to snap it into the
vehicle body.
• Lower the hood.
Grille
17
• Fit the tab on one side of a headlight lens into the notch
in the grille.
• Push firmly to snap the tab on the other side of the
headlight lens into the grille.
• Repeat this procedure to assemble the other
headlight lens to the grille.
Assembly
Hood
Grille
Headlight
Lens
Tab
18
Sport Bar
Cover
(BAC)
• With the ends of the sport bar angled toward you, fit
the sport bar cover marked "BAC" to the sport bar.
• Align the holes in the sport bar with the holes in the
sport bar cover.
• Insert two #6 x 1 1 / " screws through the sport bar cover
2
and into the sport bar, as shown.
19
Sport Bar
• Align the tips of the screws with the holes in the other
sport bar cover marked RON. Fit the two sport bar
covers together.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
12
Sport Bar
Holes
Screw Tips
Sport Bar
Cover
(RON)