Table of Contents
Advertisement
XT55 AVL User's Guide
Confidential/Released
Enable the GSM functionality
$PSRF112,
Parameter description:
30,
30:
PIN
*XX
PIN:
*XX
Example 1:
$PSRF112,30,1111*26
This command enters the PIN number of SIM card also deactivates the PIN
request of SIM card.
$PSRF112,
The write command updates the SMSC address, through which mobile originated
31,
SMs are transmitted. In text mode, the setting is used by send and write
ServiceCentre,
commands. In PDU mode, the setting is used by the same commands, but only
Format,
when the length of the SMSC address coded into <pdu> parameter equals zero.
*XX
Note: This command writes the service centre address to non-volatile memory
For further information refer to [1]
ServiceCentre: //GSM 04.11 RP SC address (address value field in string format);
Format:
*XX
Example 1:
Enter: $PSRF112,31,+492710760000,145*18
Responds:
Note:
-
See [1] for further explanation of the displayed Address Format or CME error
code.
-
If the modem returns "communication failure", it did not respond to the entered
command and ended in timeout (which is currently set to 5 seconds).
-
The SMS service center address should be entered as specified by the service
provider
XT55_avl_ug_V03
//enable the GSM functionality (i.e. deactivate PIN request)
//enter the PIN number of SIM card
//CheckSum has to be calculated.
31: // Configure the SMSC address.
BCD numbers (or GSM default alphabet characters) are converted
into characters; type of address given by <format>. Maximum
length of address: 20 characters
//Service centre address format GSM 04.11 RP SC address Type-
of- Address octet in integer format
// CheckSum has to be calculated.
OK +CSCA: "[ServiceCenter]",[Format]
(error)
+CME ERROR: [CME_error]
(error)
communication failure
Page 22 of 37
s
m
o b i l e
28.06.2004
Advertisement
Table of Contents
