Figure 9: Import Saved Text File; Figure 10: Select Text File With Included Command(S) - Siemens XT55 AVL User Manual

XT55 AVL User's Guide
Confidential/Released
Next, click the Transfer on the HyperTerminal menu and select Send text file... .
Select the saved text file "eula.txt" and click the open button.
The text file including command(s) is sent directly to the connected module XT55.
In order to configure and evaluate, remote the XT55 unit, prerequisite is the connection of a
suitable GSM modem, then establish a data connection to the XT55 module via AT
commands (see below), then follow the steps described above.
How to establish a data connection to the XT55 AVL:
AT
OK
AT+CPIN=<pin>
OK
ATD0123213346
+CRING: ASYNC
Connect 9600 .....
....................
XT55_avl_ug_V03

Figure 9: Import saved text file

Figure 10: Select text file with included command(s)

//send command
//respond
//enter the pin number and send command
//respond
//enter the XT55 AVL phone number and send command
//respond
//respond
//receiving protocols
Page 13 of 37
s
m
o b i l e
28.06.2004