Transom slide mount
DSI and HDI 83/200kHz transducers come ready to be attached to a
trolling motor mount or scupper mount. To install on the transom,
attach the transom slide mount to the transducer.
Removing the transom slide mount
The slide can be removed from the DSI transducer by depressing the release tab with a flathead screw-
driver and sliding off the transom slide mount.
The HDI 83/200kHz transom slide mount is removed by carefully pulling out slide mount and then pulling
down on the slide mount.
Removing HDI slide mount
Removing DSI slide mount
5