Select a transducer location
The primary aim is to stay clear of propeller and hull-generated turbulence, while mounting the transducer
as close to the center of the vessel as possible.
1. Avoid mounting within 3.3' (1m) to port of propeller
2. Conventional clockwise propeller rotation
3. Avoid mounting within 3" (7.5cm) to starboard of propeller
4. Best mounting location - undisturbed water flow
5. Planing strake - avoid mounting behind here
NOTE: Reverse the distance guides (1 & 3) from propeller if the engine has a counterclockwise
configuration.
1
2 3
4
3
5